NanoByte Solutions (NZ) HPE Aruba Networking Networking CX6300M 24p SFP+ 1G/10G 4p SFP56 50G 2xFan PSU Bundle

More Information

More Information
SKU	S5Z46A
EAN	0190017792194
Manufacturer	HPE
Availability	Out of Stock
Product Family	Aruba Networking

Reviews

Nickname

Summary

Review

Reasons To Buy

AI-native performance and power

The HPE Networking CX6300 Switch Series is a wire-speed solution that uses a fully distributed architecture with Gen7 ASICs that deliver low latency, increased packet buffering, and intelligent power consumption for AI, Wi-Fi 7, and Internet of Things (IoT) requirements.
The Virtual Switching Framework (VSF) allows you to quickly grow your network using high-performance front-plane stacking. Four built-in uplinks support speeds of up to 10, 25, 50, and 100 GbE for a total of 200 to 400 Gbps of stacking throughput per switch.
The Virtual Switching Extension (VSX) uses an inter-switch link (ISL) for high availability and state synchronization between two active-active switches with independent control planes; a switch can belong to either a Virtual Switching Framework (VSF) stack or a VSX cluster, but not both.
HPE Smart Rate multi-gigabit Ethernet delivers adaptive speed options for Wi-Fi, Internet of Things (IoT), and other clients, alongside Class 4 (30W), Class 6 (60W), and Class 8 (90W) PoE on each port (720W, 1440W, 2880W and 4320W maximum PoE budget options).
Additional features include a hibernation mode that enables CX6300 and CX6300L (Layer 2-only) switches to schedule downtime to conserve energy. The CX6300L stackable switches are Layer 2-only, balancing scalability, high-capacity, and cost-effective connectivity.

Automation and analytics

The HPE Networking CX6300 Switch Series delivers enhanced visibility with built-in analytics for real-time monitoring and a time series database (TSDB) that stores configuration and operational state data, making it available to quickly resolve network issues.
HPE Aruba Networking Central provides secure, AI-native full-stack network management and operations to optimize performance, accelerate troubleshooting, and unify wired networks with Wi-Fi, wide area networks, and more.
The Network Analytics Engine (NAE) provides real-time insights and actions, analyzing events that can impact network health and even mitigating problems directly through quarantining to support network, application, system and security operations.
HPE Networking Switch Multi-Edit Software introduces automation that allows for rapid network-wide changes and helps ensure policy conformance post network updates. Intelligent capabilities include search, edit, validation (including conformance checking), deployment, and audit features.
Import switch information into HPE Networking Switch Multi-Edit Software for simplified configuration management and for continual conformance validation.

Full stack management and security

The HPE Networking CX6300 Switch Series is supported on HPE Aruba Networking Central or HPE Mist delivering enhanced network visibility and an expanded AI toolset, addressing the scale and demands of the most mission-critical environments.
Dynamic segmentation that automatically applies and enforces user, device, and application-aware policies on HPE Networking wired and wireless infrastructures.
Improve visibility, performance, end-user experience and simplify IT operations with auto profiling, RBAC, L7 firewall. Application recognition and control are available via CX Advanced Feature Pack. These features are not supported on CX6300L switches.
Switch-to-switch tunnels enable scalable multi-tenancy support with Virtual Extensible Local-Area Networks (VXLAN) to VRF mapping, while allowing policy application through user roles; these features are not supported on CX6300L switches.
Reduce manual IT operations tasks around initial deployment or ongoing configuration changes to accommodate adds, moves, and changes with colorless ports using local user roles and local MAC authentication (LMA).

Deploy in data center topologies

HPE offers customers highly differentiated pre-engineered IT infrastructure solutions that span a wide variety of HPE Compute, HPE Storage, HPE Networking solutions supporting virtualization, vSAN, HCI, HPC, MCS, Microsoft, SAP HANA, VMware, Nutanix application and IaaS service offerings.
The 10/25GbE and 40/100GbE CX switches can be deployed as part of an HPE integrated and mixed compute, storage and networking configurations and deployments.
These ready-to-deploy, integrated IT data center solutions help simplify and speed IT service delivery while reducing the time, risk, and expertise needed to deploy complex solutions.

Description

The HPE Networking CX6300 Switch Series is a modern, flexible, and intelligent family of stackable switches ideal for access, aggregation, and data center top-of-rack (ToR). It features a cloud-native design and fully programmable operating system (OS). The CX6300 delivers advanced monitoring and troubleshooting with capabilities such as a real-time Network Analytics Engine, HPE Networking Switch Multi-Edit Software and flexible deployment options to implement and validate network configurations. A powerful Gen7 ASIC architecture delivers fast, non-blocking performance for AI, Wi-Fi 7, and Internet of Things (IoT) requirements. Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management. The new CX6300M switches deliver 90W Class 8 PoE (up to 4320W of PoE budget), enhanced uplink capabilities up to 50G, MACsec/PTP/AVB support, and improved support for high-power enterprise and Wi-Fi 7 deployment.

What is new supporting point:
HPE Networking CX6300 Series delivers stackable Layer 3 switching with BGP, EVPN, VXLAN, VRF, OSPF routing, robust QoS, MACsec 256, PTP, AVB and LRM; these features are not supported on CX6300L
Three stackable Layer 2-only CX6300L switches with HPE Smart Rate multi-gigabit and MACsec 256 encryption are available for high-performance access deployments
Powerful 7th Gen ASIC architecture provides the CX6300 series with 880 to 1760 Gbps system switching capacity, 660 to 1310 Mpps of system throughput and up to 200 to 400 Gbps stacking bandwidth
High-availability with choice between 2 to 10-member Virtual Switching Framework (VSF) stacking for scale, or 2-member Virtual Switching Extension (VSX) cluster for active-active redundancy
24 to 48 HPE Smart Rate multi-gigabit ports (1/2.5/5/10GbE) and 1 GbE fiber, supporting up to 90W 802.3bt PoE. New 24/48 port CX6300M models provide 90W power simultaneously for up to 48 ports.
Management, insights, and actions via HPE Aruba Networking Central or HPE Mist. Dynamic segmentation enables enhanced security and simple access for users and IoT

Specifications

Management features
Switch layer	L3
Switch type	Managed
System event log	Yes
Quality of Service (QoS) support	Yes
Multicast support	No
Configuring Location Settings (CLI)	Yes
Ports & interfaces
SFP module slots quantity	4
Basic switching RJ-45 Ethernet ports quantity	24
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Installed SFP+ modules quantity	0
Console port	USB
USB 2.0 ports quantity	1
Network
Networking standards	IEEE 802.1AX, IEEE 802.1D, IEEE 802.1ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3bt
VLAN support	Yes
Spanning tree protocol	Yes
Port mirroring	Yes
Link aggregation	Yes
IP routing	Yes
Auto MDI/MDI-X	Yes
10G support	Yes
Policy-based routing	Yes
MLD entries	4000
IPv6 multicast entries	8000
IPv4 multicast entries	8000
IGMP entries	8000
Optical fiber
Transmission distance (max)	10 km
Data transmission
MAC address table	32000 entries
Switching capacity	880 Gbit/s
Throughput	654 Mpps
Latency (1 Gbps)	2.28 µs
Latency (10 Gbps)	1.46 µs
Number of queues	8
Packet buffer memory	8 MB
Number of multicast groups filtered	8000
Security
SSH/SSL support	Yes
Access Control List (ACL)	Yes
IGMP entries	8000
DHCP features	DHCP relay, DHCP server
Multicast features
Number of multicast groups filtered	8000
Multicast support	No
MLD entries	4000
IPv6 multicast entries	8000
IPv4 multicast entries	8000
Protocols
Routing protocols	OSPF, OSPFv3
Design
Rack mounting	Yes
Stackable	Yes
Product colour	Black
Airflow direction	Front-to-back airflow
Number of fans	2 fan(s)
Certification	EN 60950-1:2006; +A11:2009 +A1:2010; +A12:2011 + A2:2013UL 60950-1 2nd EdCAN/CSA-C22.2; No. 60950-1-07IEC 60950-1:2005EN 55022:2010, A; EN 55032:2012, A; EN 55024:2010; EN 61000-3-2:2014; EN 61000-3-3:2013FCC 15 AICES-003 AVCCI A; CISPR 22 A; CISPR 32 A; CISPR 24:2010
Performance
Physical stacking (units)	10
Processor frequency	1800 MHz
Noise level	28.6 dB
Memory type	DDR4-SDRAM
Internal memory	8000 MB
Flash memory	32000 MB
Built-in processor	Yes
Stackable	Yes
Packet buffer memory	8 MB
Harmonized System (HS) code	85176990

Power
Power consumption (max)	64 W
AC input voltage	100 - 240 V
Power consumption note	Depending on installed PSU Idle: 51W – 101W 100% Traffic: 85W – 152W
Power source	AC/DC
Power supply note	2 field‐replaceable, hot‐swappable power supply slots
Power over Ethernet (PoE)
Power over Ethernet (PoE)	Yes
Other features
Latency	1 Gbps: 2.28 μs 10 Gbps: 1.46 μs 25 Gbps: 1.90 μs 50 Gbps: 3.49 μs
Performance management	Management, insights, and actions via HPE Aruba Networking Central or HPE Mist (Requires OS-CX10.18.1002)
Memory and processor	CPU: Quad-core Arm Cortex-A72 @ 1.8 GHz Memory: 8 GB DDR4, 32 GB eMMC Flash: 8 MB, 16 MB, or 32 MB, depending on model and configuration
Fan	Switch has two fan tray slots and comes with two JL669B fan trays installed. Minimum two fan trays required. Fan trays are field replaceable and hot‐swappable. Each fan tray contains two fans.
Weight (imperial)	6.02 kg (13.3 lbs)
I/O ports	24x 1G/10G SFP+ ports 4x 1G/10G/25G/50G [4] SFP ports 1x USB-C console port 1x USB Type-A host port 1x OOBM port [4] 450G capability is for use with 50G DACs for both interconnect and VSF stacking. 50G transceivers and DACs are not supported on S0E91A and S0X44A switch models, which require QSFP to SFP56 DAC cable for VSF stacking with other CX6300F and CX6300M switch models only. VSF stacking not supported on 1G ports.
Operational conditions
Operating temperature (T-T)	0 - 45 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	15 - 95%
Storage relative humidity (H-H)	15 - 90%
Operating altitude	0 - 3040 m
Non-operating altitude	0 - 4600 m
Virtual LAN features
VLAN support	Yes
Weight & dimensions
Width	44 mm
Depth	442 mm
Height	385 mm
Weight	6.02 kg
Packaging content
Rack mount kit	Yes
Technical details
Harmonized System (HS) code	85176990
Certificates
Certification	EN 60950-1:2006; +A11:2009 +A1:2010; +A12:2011 + A2:2013UL 60950-1 2nd EdCAN/CSA-C22.2; No. 60950-1-07IEC 60950-1:2005EN 55022:2010, A; EN 55032:2012, A; EN 55024:2010; EN 61000-3-2:2014; EN 61000-3-3:2013FCC 15 AICES-003 AVCCI A; CISPR 22 A; CISPR 32 A; CISPR 24:2010
Packaging data
Rack mount kit	Yes
Logistics data
Harmonized System (HS) code	85176990

HPE Aruba Networking Networking CX6300M 24p SFP+ 1G/10G 4p SFP56 50G 2xFan PSU Bundle

Please complete your information below to login.

AI-native performance and power

Automation and analytics

Full stack management and security

Deploy in data center topologies

Related Products